The U-value of a window is a measurement of the rate of heat loss indicating how well your windows are keeping valuable heat in. It is expressed as Watts per square metre Kelvin W/m2 K. The lower the U-value the better the thermal performance of the glass. So called 'Low-emissivity' or 'Low E' glass offers improved thermal insulation denoted by very low U-values.
A low-E glass is a glass with a special coating designed to reflect heat back into the room, thus reducing heat loss. The extent to which low-E glass reduces heat loss is measured by the U-value, the lower the U-value the better the thermal insulation. You are required to have a low-E glass in your windows to comply with the latest Building Regulations. These new regulations have been introduced to reduce CO2 emissions associated with heating.
Ideally SGG PLANITHERM should always be positioned on face 3 of the double-glazed unit. However, if necessary it can be positioned on face 2 as long as it is facing the cavity and thus protected from the external atmosphere.
Certain climatic conditions or high humidity levels, without rain can lead to the formation of condensation on the external surface of the outer pane. It is also possible that due to shelter from nearby trees or buildings, external condensation will appear on some windows but not others.
Low-E is designed to reflect heat back into a room, therforere reducing heat loss. By using a low-E glass in your windows your home will be better insulated, thus reducing your requirement for additonal heating.
Government Building Regulations require us to save energy, to help protect the environment. Using low-E glass is the most efficient way of doing this with glazing. This also provides benefits to you as a property owner as money can be saved on heating bills as heat loss is reduced by a massive 75% compared to single glazing and at least 40% compared to traditional double glazing. Rooms are also more comfortable as cold spots near windows and drafts are reduced. Finally unsightly condensation on the inside of the glass is reduced beacuse the temperature of the interior pane is kept closer to ro
Haze can occur on most coated glass. However, the effect will be more noticeable on some types of coated glass than on others. Haze gives the appearance of a fine, uniform, layer of dust deposited on the surface of the glass. The effect is more noticeable when the glass is viewed at an angle or under strong light. In situations where the glass is in partial shadow, the shaded area will be free of the effect, giving a clean appearance in the shadow and a dusty appearance in the lit area. This contrast can be very noticeable. Hard coated low-E glass can manifest this effect. The reason for this
A solar control glass is a glass with a special coating designed to reduce the amount of heat entering a building. It reflects and absorbs heat as well as filtering light for reduced glare.Using a solar control glass can reduce the need for air-conditioning and blinds. There are many types of solar control glass offering different aesthetic options; tinted, reflective and neutral.